User Manual Q&AAnswer
Dec 17, 2024 - 02:05 AM
To jump-start your car using the NEXPOW G17 Portable Car Jump Starter, follow these step-by-step instructions:
1. Ensure Safety: Make sure both the jump starter and your vehicle are turned off before connecting any cables. Also, ensure that the jump starter is sufficiently charged (above 25%).
2. Locate the Battery: Open the hood of your car and locate the battery. It is usually located in the engine compartment.
3. Connect the Jumper Cables: Take the red jumper cable and connect one end to the positive (+) terminal of the car battery. The positive terminal is usually marked with a "+" sign or a red cover. Then, take the black jumper cable and connect one end to the negative (-) terminal of the car battery. The negative terminal is usually marked with a "-" sign or a black cover.
4. Connect the Jumper Cables to the Jump Starter: Connect the other ends of the jumper cables to the corresponding positive (+) and negative (-) terminals on the jump starter. The jump starter should have clearly labeled terminals.
5. Start the Car: Once all the connections are secure, turn on the jump starter and then start your car. The jump starter will deliver a high current to your car's battery, providing the necessary power to start the engine.
6. Disconnect the Jumper Cables: After your car has started, carefully disconnect the jumper cables in the reverse order of how you connected them. Start by removing the black jumper cable from the jump starter, then from the negative (-) terminal of your car battery. Finally, remove the red jumper cable from the jump starter and then from the positive (+) terminal of your car battery.
7. Close the Hood: Close the hood of your car and let the engine run for a few minutes to ensure the battery is charging.
It is important to read and follow the instructions provided in the user manual for your specific NEXPOW G17 Portable Car Jump Starter model to ensure safe and proper usage.
Add New Comment