User Manual Q&AAnswers
Dec 17, 2024 - 01:56 AM
To pair your CENSGO BTDM-BK Wireless Headphones Beanie Hat with your phone, follow these steps:
1. Turn on Bluetooth on your phone: Go to the settings menu on your phone and enable Bluetooth.
2. Put the beanie hat in pairing mode: Press and hold the power button on the control panel of the beanie hat until the LED indicator starts flashing blue and red. This indicates that the beanie hat is in pairing mode.
3. Select the beanie hat on your phone: On your phone's Bluetooth settings, you should see a list of available devices. Look for "CENSGO BTDM-BK" and select it to connect.
4. Confirm the pairing: Once you select the beanie hat on your phone, it should pair automatically. You may see a confirmation message on your phone's screen.
5. Test the connection: Play some music or make a test call to ensure that the beanie hat is connected and working properly. The sound should come through the beanie hat's speakers.
Note: If you have previously paired the beanie hat with another device, make sure to disconnect or unpair it before attempting to pair it with your phone.
For more detailed instructions, please refer to the user manual provided with your CENSGO BTDM-BK Wireless Headphones Beanie Hat.
Dec 17, 2024 - 01:59 AM
To pair your CENSGO BTDM-BK Wireless Headphones Beanie Hat with your phone, follow these steps:
1. Turn On the Beanie Hat (Headphones)- Locate the power button on the beanie's control panel (usually inside or on the side of the hat).
- Press and hold the power button for a few seconds until the LED indicator flashes (usually red or blue). This means the headphones are in pairing mode.
- Go to your phone's Settings.
- Find and tap on Bluetooth to turn it on. Ensure your phone is set to discoverable mode.
- After the beanie enters pairing mode, look for the CENSGO BTDM-BK (or a similar name) in the Bluetooth list on your phone.
- Select it to initiate pairing.
- Once paired, you should see a message on your phone saying the device is connected, and the LED light on the beanie might turn solid blue (or change color, depending on the model).
- Play some music or a sound on your phone to test if the audio is coming through the beanie's speakers.
- If the headphones don’t appear in the Bluetooth list, ensure the beanie is in pairing mode (indicated by blinking blue/red lights).
- If pairing is unsuccessful, try turning the beanie off and back on, or reset it by holding the power button for a longer duration (usually 10 seconds).
This should successfully pair your CENSGO BTDM-BK Wireless Headphones Beanie Hat with your phone.
Add New Comment