User Manual Q&AAnswer
Dec 17, 2024 - 01:42 AM
To pair the Qshell QS-BB031-HUI with your device, follow these steps:
1. Turn on the hat by pressing the "On/Off" button for about 5 seconds until the LED light flashes red and blue.
2. On your device, enable the Bluetooth function. This is usually found in the settings menu.
3. Press the power button on the hat until the LED indicator starts flashing blue and red alternately. This indicates that the hat is in pairing mode.
4. On your device, search for available Bluetooth devices. Look for "Qshell" in the list of available devices and select it to initiate the pairing process.
5. Once the hat is successfully paired with your device, the LED indicator on the hat will flash blue slowly.
6. You are now connected, and you can start enjoying your music or taking calls hands-free through the hat's built-in speakers and microphone.
Note: If you have previously paired the hat with another device, make sure to disconnect or unpair it before attempting to pair it with a new device.
Add New Comment