How do I install ViLSOM LED Vanity Mirror Lights? (ViLSOM Led Vanity Mirror Lights User Manual)

Answer

manuals.plus

Dec 17, 2024 - 01:39 AM

Installing ViLSOM LED Vanity Mirror Lights is a straightforward process. Here are the step-by-step instructions:

1. Clean the mirror surface: Before installing the lights, make sure the mirror surface is clean and free from any dust or debris. This will ensure better adhesion of the adhesive tape.

2. Peel off the backing of the adhesive tape: Each strip of ViLSOM LED Vanity Mirror Lights comes with a strong double-sided sticky tape on the back. Peel off the backing of the adhesive tape to expose the sticky side.

3. Stick the lights along the edges of the mirror: Carefully position the LED strip along the edges of the mirror, ensuring that the lights face towards the mirror surface. Press firmly to ensure good adhesion.

4. Repeat for additional strips (if necessary): If your mirror is larger and requires multiple strips, repeat the installation process for each additional strip. Make sure to align the strips properly for a seamless look.

5. Connect the power adapter: ViLSOM LED Vanity Mirror Lights come with a power adapter that needs to be plugged into a standard electrical outlet. Connect the power adapter to the lights, following the manufacturer's instructions.

6. Test the lights: Once the installation is complete, turn on the lights and test them to ensure they are working properly. You can adjust the brightness settings according to your preference.

Please note that these are general installation instructions. For specific details and any additional steps, refer to the user manual provided with your ViLSOM LED Vanity Mirror Lights.