User Manual Q&AAnswer
Dec 17, 2024 - 01:37 AM
To set the actuation threshold on the Ortis LF40-HVCO3 Automatic Vacuum Switch, follow these steps:
1. Locate the actuation threshold adjustment switch on the switch panel.
2. Use a small screwdriver or similar tool to slide the switch to either the 30W or 60W position.
- Setting the switch to 30W will make the switch more sensitive, activating the vacuum at a lower power draw.
- Setting the switch to 60W will make the switch less sensitive, requiring a higher power draw to activate the vacuum.
Note: The actuation threshold should be set according to the power requirements of your specific power tool. If you are unsure, refer to the power tool's manual or consult the manufacturer for guidance.
By adjusting the actuation threshold, you can customize the sensitivity of the switch to prevent unnecessary vacuum operation and enhance efficiency.
Add New Comment