User Manual Q&AAnswer
Dec 17, 2024 - 01:32 AM
To charge the ENERGIZE LAB Eilik Cute Robot Pet, follow these steps:
1. Locate the charging port on the robot pet. It is usually located on the bottom or back of the robot.
2. Connect the provided charging cable to the charging port of the robot pet.
3. Plug the other end of the charging cable into a power source, such as a USB port on a computer or a wall adapter.
4. Once connected, the robot pet's LED lights may indicate that it is charging. Refer to the user manual for specific LED light indications.
5. Allow the robot pet to charge until it reaches full battery capacity. This may take a few hours, depending on the current battery level.
6. Once fully charged, disconnect the charging cable from the robot pet and the power source.
Note: It is important to use the provided charging cable and a compatible power source to ensure safe and proper charging of the robot pet. Avoid using third-party charging cables or adapters that may not be compatible with the device.
For more detailed instructions and safety precautions, please refer to the user manual provided with the ENERGIZE LAB Eilik Cute Robot Pet.
Add New Comment