User Manual Q&AAnswer
Dec 17, 2024 - 01:29 AM
To program actions for the Fisca LN0011 Remote Control Robotic Dog, follow these steps:
1. Ensure that the dog and the remote control are turned on.
2. Press the "setting" button on the remote control (located at the bottom right).
3. Press the buttons on the remote control that correspond to the actions you want to program. For example, if you want the dog to walk forward, press the forward button.
4. After pressing the desired buttons, press the "setting" button again to confirm the programming.
5. The dog will now remember and repeat the programmed actions when prompted.
Please refer to the manual for more detailed instructions and specific button locations on the remote control.
Add New Comment