User Manual Q&AAnswer
Dec 17, 2024 - 01:23 AM
To activate the LED feature on the Huayu LED Inductive Teddy Bear, follow these steps:
1. Ensure that the batteries are properly installed: Open the battery compartment on the bear's back and insert three AA batteries (not included). Make sure the batteries are inserted correctly according to the polarity markings.
2. Close the battery compartment securely: Ensure that the battery compartment door is closed tightly to prevent any loose connections.
3. Locate the activation button: The button to turn on the LED lights is usually located on the right arm of the teddy bear.
4. Press the button to turn on the LED lights: Once you have located the button, press it to activate the LED lights. The bear should start emitting bright colors.
5. Press the button again to turn off the LED lights: If you want to turn off the LED lights, simply press the button again.
Note: If the LED lights do not turn on, make sure that the batteries are properly installed and fully charged. If the issue persists, try replacing the batteries. If the problem still persists, there may be a connection issue within the bear that requires professional repair.
Please refer to the "Setup Guide" section of the user manual for more detailed instructions and troubleshooting tips.
Add New Comment