User Manual Q&AAnswer
Dec 17, 2024 - 01:06 AM
To charge the KingsDragon 917 Remote Control Smart Robot, follow these steps:
1. Use the cord that came with the robot to connect it to a USB charging port.
2. Make sure the robot is turned off.
3. Plug the USB end of the cord into the charging port on the robot.
4. Leave the robot connected to the USB charging port for approximately two hours, or until it is fully charged.
5. While charging, you may notice an indicator light on the robot that changes color or turns off when the charging is complete. Refer to the user manual for specific indicators.
6. Once fully charged, disconnect the robot from the USB charging port.
It is important to note that the KingsDragon 917 Remote Control Smart Robot has a built-in 3.7V 600mAh battery, which can be charged via USB. After two hours of charging, the robot can play music for up to an hour. Make sure to follow the recommended charging times to avoid damaging the battery or overcharging it.
Add New Comment