Answer
Dec 17, 2024 - 12:59 AM
To set up Wi-Fi for the XTU J1 Smart Video Doorbell, please follow these steps:
1. Make sure your Wi-Fi network is a 2.4 GHz network. The doorbell does not support 5 GHz Wi-Fi.
2. Ensure that your Wi-Fi network name (SSID) and password do not contain any special characters or symbols.
3. Place the doorbell near your Wi-Fi router for a strong signal during the setup process.
4. Download and install the 'CloudEdge' App from Google Play or the App Store.
5. Register an account in the app using your mobile phone number or email ID.
6. Launch the 'CloudEdge' App and follow the in-app instructions to start the Wi-Fi configuration.
7. Make sure to enter the correct Wi-Fi network name and password when prompted.
8. The app will guide you through the rest of the setup process.
Note: It is recommended to fully charge the doorbell's batteries with a USB-compatible wall charger (not included) and the provided USB cable for about 8-10 hours before installation.
For more detailed instructions, please refer to the user guide provided with the product.
Add New Comment