User Manual Q&AAnswer
Dec 17, 2024 - 12:56 AM
To connect your smartphone to the GooDee YG600 Plus WiFi and Bluetooth Supported Projector, you can use the screen mirroring function. Here are the step-by-step instructions for both iPhone (iOS system) and Android devices:
For iPhone, iPad, and iPod touch (iOS system):
1. Activate the projector and go to "Settings" to establish your Wi-Fi connection.
2. Visit "IOS Cast" on the projector.
3. On your iPhone, open "Screen Mirroring" in the Control Center (swipe down from the top right corner of the screen on iPhone X or later, or swipe up from the bottom on earlier iPhone models).
4. Select "YG600 Plus-xxxx" from the list of available devices. Make sure your phone is connected to the same Wi-Fi network as the projector.
5. Your iPhone screen will now be mirrored on the projector.
For Android devices:
1. Activate the projector and configure the Wi-Fi connection.
2. On your Android device, open the Multi-screen/Wireless Display/Screen Mirroring/Smart View function (the name may vary depending on your device).
3. Select "Mira cast" on the projector.
4. Find the projector in the list of available devices and select "YG600 Plus-xxxx" to connect.
5. Your Android device screen will now be mirrored on the projector.
Note: Your Android device must support multi-screen/wireless display in order to use this feature.
Please refer to the GooDee YG600 Plus WiFi and Bluetooth Supported Projector Instruction Manual for more detailed instructions and troubleshooting tips.
Add New Comment