User Manual Q&AAnswer
Dec 17, 2024 - 12:42 AM
To assemble the BLACK+DECKER LHT321 20V MAX Hedge Trimmer, follow these steps:
1. Cut the plastic zip tie that is holding the guard and bail handle to the trimmer housing.
2. Remove the six screws that are partially run into the trimmer housing.
3. Slide the guard onto the front of the trimmer housing and align it properly.
4. Insert two of the six screws into the openings on the sides of the guard and tighten them securely.
5. Slide the bail handle onto the front of the trimmer housing behind the guard and align it properly.
6. Insert the remaining four screws into the openings on the sides of the bail handle and tighten them securely.
Once you have completed these steps, your BLACK+DECKER LHT321 20V MAX Hedge Trimmer will be fully assembled and ready to use. For more detailed instructions and illustrations, please refer to the instruction manual provided with the product.
Add New Comment