User Manual Q&AAnswer
Dec 16, 2024 - 11:53 PM
Adjusting the chain tension on the CRAFTSMAN CMECS600 is quick and easy thanks to its tool-free chain tensioning system. Here are the step-by-step instructions:
1. Ensure the chainsaw is turned off and unplugged from the power source for safety.
2. Locate the chain tensioning xxxx or lever on the side of the chainsaw. It is usually marked with a chain symbol.
3. Loosen the chain tension by turning the xxxx counterclockwise or releasing the lever.
4. Using your hand or a tool, pull the chain gently to ensure it is properly seated on the bar.
5. Tighten the chain tension by turning the xxxx clockwise or engaging the lever until the chain is snug against the bar, but still able to be pulled easily.
6. Check the chain tension by pulling it away from the bar. It should have a slight amount of tension, but still be able to move freely.
7. Once the desired tension is achieved, secure the chain tension by tightening the xxxx or engaging the lever firmly.
8. Check the chain tension again to ensure it is properly adjusted.
It is important to regularly check and adjust the chain tension as needed to ensure safe and efficient operation of the chainsaw. Refer to the operator's manual for additional details and illustrations on how to adjust the chain tension for your specific model.
Add New Comment