User Manual Q&AAnswer
Dec 16, 2024 - 11:49 PM
To charge the battery of the Cheerwing UDI001 High-Speed Electronic Remote Control Boat, please follow these steps:
1. Use the provided USB cable to connect the boat's battery to a power source. The USB cable should be plugged into a USB port on a computer, a USB wall adapter, or a USB power bank.
2. Ensure that the boat's power switch is turned off before connecting the USB cable to the boat's battery.
3. Once the USB cable is connected to the battery, the charging indicator on the battery will light up, indicating that the charging process has started.
4. Allow the battery to charge fully. The maximum charging time is approximately 80 minutes. It is important not to overcharge the battery, so make sure to disconnect it from the power source once it is fully charged.
5. After the battery is fully charged, disconnect the USB cable from the battery.
Note: It is recommended to charge the battery in a well-ventilated area and avoid charging it overnight or leaving it unattended while charging.
For more detailed instructions and safety precautions, please refer to the user manual provided with the Cheerwing UDI001 High-Speed Electronic Remote Control Boat.
Add New Comment