User Manual Q&AAnswer
Dec 16, 2024 - 11:39 PM
Adjusting the chain tension on the Milwaukee 2727-20 16-inch FUEL Chainsaw is a straightforward process. Here are the steps to follow:
1. Ensure the chainsaw is turned off and the battery is removed for safety.
2. Locate the chain tensioning xxxx or xxxx on the side of the chainsaw near the bar.
3. Loosen the chain tensioning xxxx or xxxx by turning it counterclockwise. This will release the tension on the chain.
4. Using a flathead screwdriver or the provided tool, turn the chain tensioning xxxx clockwise to tighten the chain. Make sure to adjust it to the manufacturer's recommended tension.
5. Check the chain tension by pulling up on the chain from the bottom of the bar. The chain should have a slight amount of tension, but still be able to move freely.
6. Once the desired tension is achieved, tighten the chain tensioning xxxx or xxxx by turning it clockwise.
7. Double-check the chain tension by pulling up on the chain again to ensure it is properly tensioned.
8. Reinstall the battery and you're ready to use the chainsaw.
For more detailed instructions and illustrations, please refer to the operator's manual that comes with the Milwaukee 2727-20 16-inch FUEL Chainsaw. It provides specific guidelines and safety precautions for adjusting the chain tension.
Add New Comment