User Manual Q&AAnswer
Dec 16, 2024 - 11:17 PM
To switch between the leaf blowing and vacuuming functions on the WORX WG518, follow these steps:
1. Ensure that the blower is turned off and unplugged from the power source for safety.
2. Locate the mode switch on the blower. It is usually located near the handle or on the main body of the blower.
3. Depending on the model, the mode switch may have two positions: "Blower" and "Vacuum/Mulcher." Slide the switch to the desired mode.
4. Once the mode switch is in the desired position, you can proceed with using the blower or vacuum function accordingly.
Note: When using the vacuum function, make sure to attach the collection bag securely to the blower. This bag is typically included with the WG518 and can be attached to the blower's nozzle. Ensure that the bag is properly sealed to prevent any debris from escaping.
For more detailed instructions and illustrations, please refer to the manufacturer's manual that came with your WORX WG518. If you have any further questions or need assistance, you can contact WORX customer support at (555) 555-5555 or support@worx.com.
Add New Comment