User Manual Q&AAnswer
Dec 16, 2024 - 11:02 PM
Sure! Here is a step-by-step guide on how to set up the OSDTKRU 4K Wireless HDMI Display Dongle Adapter:
1. Connect the dongle adapter to the HDMI port of your TV or projector.
2. Make sure your TV or projector is set to the correct HDMI input.
3. Power on the dongle adapter by plugging it into a power source using the included power cable.
4. On your mobile device or computer, go to the Wi-Fi settings and connect to the Wi-Fi network of the dongle adapter. The network name should be something like "RENKCHIP-XXXX" (XXXX represents a unique identifier).
5. Once connected, open the screen mirroring or casting feature on your mobile device or computer. The specific steps may vary depending on your device, but it is usually found in the settings or control center/notification panel.
6. Select the dongle adapter from the list of available devices for screen mirroring or casting.
7. After a short while, your device's screen should be mirrored on the TV or projector connected to the dongle adapter.
Note: For specific instructions on screen mirroring for Android, Windows, or Mac devices, please refer to the "System mirroring on Android," "Mirroring a Windows system," or "System mirroring for MAC" sections in the user manual.
If you encounter any issues during the setup process, please refer to the user manual for troubleshooting tips or contact the manufacturer's customer support for further assistance.
Add New Comment