How do I install the Lafulit LED Under Cabinet Lights? (LAFULIT ‎9.8FT LED Under Cabinet Lights User Manual)

Answer

manuals.plus

Dec 16, 2024 - 10:56 PM

Installing the Lafulit LED Under Cabinet Lights is a straightforward process. Here are the step-by-step instructions:

1. Start by cleaning the area where you will be installing the lights. Make sure the surface is dry and free from any dust or debris.

2. Decide on the placement of the lights. You can position them directly under the cabinets, closer to the front edge, for optimal task lighting.

3. If your lights come with adhesive backing, remove the protective film from the adhesive side of the light strip.

4. Carefully align the light strip with the desired location under the cabinet and press it firmly onto the surface. Ensure that the strip is straight and securely attached.

5. If your lights require mounting brackets, attach the brackets to the desired location under the cabinet using screws or adhesive.

6. Slide the light strip into the mounting brackets, ensuring a secure fit.

7. Repeat the installation process for each section of the light strip, connecting them as needed using the provided connectors.

8. Once all the light strips are installed, connect the power adapter to the lights. Plug the adapter into a nearby power outlet.

9. Test the lights by turning them on using the RF remote control or the in-line dimmer.

10. Adjust the brightness level or use any additional features available on the remote control or dimmer to customize the lighting to your preference.

11. If desired, you can also set timers or memory capabilities to maintain the same brightness level every time the lights are turned on.

Please refer to the user manual provided with your Lafulit LED Under Cabinet Lights for specific instructions and any additional information regarding installation or usage.