How do I set up the WeMo F7C027fc Switch Smart Plug? (WeMo F7C027fc Switch Smart Plug OWNERS MANAUL)

Answer

manuals.plus

Dec 16, 2024 - 10:52 PM

Sure! Here are the step-by-step instructions to set up the WeMo F7C027fc Switch Smart Plug:

1. Download and install the latest WeMo App from the App Store or Google Play store on your Android 4.4 device or higher, or iOS 9.0 device or higher.

2. Enable Wi-Fi on your mobile device by going to Settings and selecting Wi-Fi.

3. Locate and connect to the WeMo device with the same WeMo ID found at the back of the device you are trying to install. The WeMo ID is the word "WeMo" followed by the WeMo model, then three alphanumeric characters (e.g., WeMo.Insight.xxx). The WeMo device does not require a password for initial setup.

4. Launch the WeMo App on your mobile device. Make sure the "Remember Wi-Fi Settings" option is checked so the app can save your Wi-Fi settings.

5. When prompted, select your router's main Wi-Fi network.

6. Enter your router's Wi-Fi password in the given field and tap Save.

7. The app will attempt to set up remote access. Once the setup is complete, it will prompt you that Remote Access has been enabled. Tap OK.

8. You will then be directed to a window where you can customize the name and picture of your WeMo device. Once finished, tap Save.

That's it! Your WeMo F7C027fc Switch Smart Plug is now set up and ready to use. You can control it using the WeMo App on your mobile device or even with voice commands if you have an Amazon Echo device. For more information on controlling the device with your voice or troubleshooting common issues, refer to the WeMo F7C027fc Switch Smart Plug Owner's Manual.