User Manual Q&AAnswer
Dec 16, 2024 - 10:48 PM
Adjusting the chain tension on the Zikopomi XH950131 Electric Chain Saw is a simple process. Here are the step-by-step instructions:
1. Ensure the saw is turned off and the battery is removed for safety.
2. Locate the chain tensioning xxxx or xxxx on the side of the saw near the guide bar.
3. Loosen the chain tensioning xxxx or xxxx by turning it counterclockwise. This will release the tension on the chain.
4. Use the provided screwdriver or a suitable tool to turn the chain tensioning xxxx or xxxx clockwise. This will tighten the chain and increase the tension.
5. Check the chain tension by pulling up on the chain from the middle of the guide bar. The chain should have a slight amount of tension, but still be able to be pulled easily.
6. If the chain is too loose, continue tightening the chain tensioning xxxx or xxxx until the desired tension is achieved. If the chain is too tight, loosen the chain tensioning xxxx or xxxx slightly.
7. Once the chain tension is adjusted, tighten the chain tensioning xxxx or xxxx securely.
8. Reinstall the battery and ensure it is properly inserted before using the saw.
Please refer to the Zikopomi XH950131 Electric Chain Saw user manual for more detailed instructions and illustrations on adjusting the chain tension.
Add New Comment