User Manual Q&AAnswer
Dec 16, 2024 - 10:44 PM
To replace the bulb in the CONAIR BE151T Double Sided Lighted Mirror, follow these steps:
1. Turn off the power and unplug the mirror. Allow it to cool for at least 3 minutes before proceeding.
2. Contact a Conair Service Center at 1-800-3-CONAIR to obtain the replacement bulb information. The replacement bulb is called RP-BE151T and can be purchased for $1.50 each, including shipping and handling.
3. Remove the two screws located on each side of the mirror to detach the removable housing from the stand.
4. Carefully lift off the removable housing from the half that is affixed to the stand.
5. Unscrew the old bulb and replace it with the new bulb.
6. Carefully align the xxxx holes on the removable half with the fixed half and replace the removable half.
7. Insert the screws into the xxxx holes and tighten them securely.
Please note that it is important to turn off the power and unplug the mirror before replacing the bulb. Also, allow the mirror to cool down before handling the bulb. If you are unsure or need further assistance, it is recommended to contact an authorized service center for repair.
Add New Comment