User Manual Q&AAnswer
Dec 16, 2024 - 10:43 PM
To assemble the chain on the PROYAMA 62CC Chainsaw, please follow these steps:
1. Start by ensuring the chainsaw is turned off and the engine is cool.
2. Locate the chain tensioning xxxx on the side of the chainsaw, near the guide bar.
3. Loosen the chain tensioning xxxx by turning it counterclockwise using the provided tool kit or a suitable wrench.
4. Place the chain onto the guide bar, ensuring that the cutting teeth are facing forward and the drive links fit into the groove on the guide bar.
5. Carefully position the chain around the sprocket at the front of the chainsaw.
6. Begin tightening the chain tensioning xxxx by turning it clockwise. As you tighten, ensure that the chain is properly seated on the guide bar and there is proper tension. The chain should be snug against the guide bar, but still able to move freely.
7. Once the chain is properly tensioned, tighten the chain tensioning xxxx securely.
8. Check the chain tension again to ensure it is properly adjusted. The chain should not sag or be too tight.
9. Before starting the chainsaw, manually rotate the chain around the guide bar to ensure it moves smoothly and is properly aligned.
Please refer to the operator's manual for more detailed instructions and illustrations specific to the PROYAMA 62CC Chainsaw.
Add New Comment