User Manual Q&AAnswer
Dec 16, 2024 - 10:20 PM
Attaching the SKYREAT SKT080 Tablet Mount Holder to your DJI Mavic drone's remote controller is a straightforward process. Here are the step-by-step instructions:
1. Start by ensuring that your DJI Mavic drone's remote controller is powered off.
2. Locate the mounting bracket on the remote controller. It is usually located at the top center of the controller.
3. Open the mount holder by gently pulling the arms apart until they are fully extended.
4. Align the mounting bracket of the mount holder with the mounting bracket on the remote controller.
5. Place the mount holder onto the mounting bracket of the remote controller, ensuring that it fits securely.
6. Once the mount holder is properly aligned and attached, gently press the arms of the mount holder inward to secure it in place.
7. Ensure that the mount holder is firmly attached to the remote controller before powering on your DJI Mavic drone.
Note: It is important to follow the instructions provided in the user manual for your specific DJI Mavic drone model. The above instructions are general guidelines and may vary slightly depending on the drone model and mount holder design.
For more detailed instructions and illustrations, please refer to the user manual that came with your SKYREAT SKT080 Tablet Mount Holder.
Add New Comment