User Manual Q&AAnswer
Dec 16, 2024 - 10:12 PM
To install the VIOFO A119 V3 2K 60FPS Car Dash Camera, follow these steps:
1. Install the Mount: Slide the mount into the slot on the back of the camera. Peel off the glue protector from the sticker. Choose a suitable location to install/mount the camera, ensuring it provides the best possible view.
2. Connect to Car Charger: Plug the USB charging adapter into your vehicle's 12V/24V power socket. Insert the Mini USB cable's male port into the camera's female Mini USB port. For GPS version mounts, use the female Mini USB port on the mount or on the camera's side. For non-GPS version mounts, use the female Mini USB port on the camera's side.
3. Adjust the View Angle: Adjust the angle by moving the lens up/down.
Note: It is recommended to avoid turning on 'Motion Detection' while driving, as it may interrupt continuous recording. Also, ensure that the camera is installed in a location that does not compromise the driver's visibility and safety.
For more detailed instructions and illustrations, please refer to the VIOFO A119 V3 2K 60FPS Car Dash Camera User Manual.
Add New Comment