User Manual Q&AAnswer
Dec 16, 2024 - 10:00 PM
The installation process for the Tingkengse Wireless WiFi Light Bulb Security Camera is relatively straightforward. Here are the steps to install the camera:
1. Turn off the power: Before starting the installation, make sure to turn off the power to the light socket where you will be installing the camera.
2. Remove the existing light bulb: Unscrew and remove the existing light bulb from the socket.
3. Install the camera bulb: xxxx the Tingkengse Wireless WiFi Light Bulb Security Camera into the light socket, just like you would with a regular light bulb. Ensure that it is securely tightened.
4. Connect to WiFi: Download the app for the camera onto your smartphone. Use the app to help your camera connect to your WiFi network. Follow the instructions provided in the user manual for the specific steps to connect the camera to WiFi.
5. Set up storage options: The camera supports both cloud storage and Micro SD card storage. If you want to use cloud storage, you will need to purchase a subscription. If you prefer to use a Micro SD card, make sure to insert a compatible card into the camera. Note that the camera does not come with an SD card.
6. Complete setup: Once you have connected the camera to WiFi and set up your preferred storage option, you can proceed to complete the setup process using the app. Follow the instructions in the user manual or provided by the app to finish the setup.
7. Test and adjust settings: After the installation and setup, test the camera by accessing the camera feed through the app or web portal. Make any necessary adjustments to the camera angle or settings using the app.
Remember to refer to the user manual for detailed instructions specific to your model of the Tingkengse Wireless WiFi Light Bulb Security Camera.
Add New Comment