User Manual Q&AAnswer
Dec 16, 2024 - 09:49 PM
To connect the Hunter BTT100 BTT Tap Timer to your water supply, please follow these steps:
1. Locate a standard ¾" (19 mm) threaded water supply/hose faucet outlet.
2. Hand-tighten the Tap Timer to the water supply/hose faucet outlet until it is secure.
3. Depending on the model, connect a ¾" (19 mm) inlet hose, drip adapter (Model No. BTT-LOC), or quick-connect adapter (included) to the Tap Timer outlet.
4. Hand-tighten the connection until it is secure.
Please refer to the "Connecting to Water Supply" section in the Quick Start Guide for more detailed instructions and illustrations.
Note: It is important to use a Hose Vacuum Breaker where required to prevent backflow to the water supply, and a pressure regulator where required to control the output of water. Make sure to follow the manufacturer's instructions and guidelines for proper installation and usage.
If you have any further questions or need additional assistance, please consult the Hunter BTT100 BTT Tap Timer Quick Start Guide or visit the manufacturer's website at hunterindustries.com/BTT.
Add New Comment