User Manual Q&AAnswer
Dec 16, 2024 - 09:43 PM
To install the Wyze Sprinkler Controller, please follow these step-by-step instructions:
1. Start by drilling two holes on the wall where you want to install the controller. The size of the holes should be 6mm × 40mm, and the distance between the two holes should be 90mm. If the wall is made of wood, please refer to step 3.
2. Tap the anchors into the holes on the wall.
3. xxxx the mount onto the wall.
4. Connect the power adapter, valve wires, and sensors to their corresponding terminals.
5. Place the back of the controller at the lower end of the mount and push the controller up into the mount.
6. Download the Wyze app and select "Add a product". Follow the app's instructions to complete the setup process. Once the system setup is finished, you can create irrigation tasks.
For more detailed information and illustrations, please refer to the Wyze Sprinkler Controller User Manual.
Note: It is always recommended to read and follow the instructions provided in the user manual for proper installation and setup of the Wyze Sprinkler Controller.
Add New Comment