How do I set up the La Crosse Technology V21-WTH Wireless Remote Monitoring Wind Station? (LACROSSE TECHNOLOGY V21-WTH Wireless REMOTE MONITORING WIND STATION Instructions Manual)

Answer

manuals.plus

Dec 16, 2024 - 09:34 PM

To set up the La Crosse Technology V21-WTH Wireless Remote Monitoring Wind Station, please follow the steps below:

1. Install Batteries:
- Open the battery compartment on the back of the display unit and insert 3 AA batteries.
- Open the battery compartment on the back of the wind sensor and insert 2 AA batteries.

2. Pairing the Wind Sensor:
- Press and hold the "TX" button on the wind sensor for 2 seconds until the LED light starts flashing.
- Within 30 seconds, press and hold the "CH" button on the display unit for 2 seconds until the LED light starts flashing.
- The wind sensor will transmit data to the display unit, and the LED light on both devices will stop flashing when the pairing is successful.

3. Setting the Time and Date:
- Press the "SET" button on the display unit to enter the setting mode.
- Use the "+" and "-" buttons to adjust the year, month, date, hour, and minute.
- Press the "SET" button again to confirm and move to the next setting.

4. Mounting the Wind Sensor:
- Choose a suitable location for the wind sensor, away from obstructions such as buildings or trees.
- Mount the wind sensor using the included mounting bracket and screws.
- Ensure that the wind sensor is facing north and is level for accurate wind direction readings.

5. Display Unit Functions:
- The display unit will show various weather data, including wind speed, wind direction, temperature, humidity, and more.
- Use the "MODE" button to cycle through different display modes.
- Press the "ALERT" button to enable or disable weather alerts.

For more detailed instructions and troubleshooting tips, please refer to the complete La Crosse Technology V21-WTH Wireless Remote Monitoring Wind Station Instructions Manual provided above.