User Manual Q&AAnswer
Dec 16, 2024 - 08:37 PM
To pair the DEWENWILS HRLS11C1 switch with the remote control, please follow these steps:
1. Make sure the switch is plugged into a power outlet and turned on.
2. Remove the battery cover from the back of the remote control and insert the required batteries (as specified in the user manual).
3. Press and hold the "ON" button on the remote control for about 5 seconds until the LED indicator on the switch starts flashing rapidly.
4. Release the "ON" button on the remote control.
5. Within 5 seconds, press the "ON" button on the remote control again.
6. The LED indicator on the switch will flash slowly to indicate that the pairing process is successful.
Note: If the LED indicator on the switch does not flash rapidly when you press and hold the "ON" button on the remote control, try replacing the batteries in the remote control and repeat the pairing process.
Once the switch and remote control are paired, you can use the remote control to turn the switch on or off wirelessly.
Add New Comment