User Manual Q&AAnswer
Dec 16, 2024 - 08:32 PM
To connect the Corsair CL-9011109-WW Lighting Node PRO to your PC, follow these steps:
1. Turn off your system before installation.
2. Plug the mini USB cable into the back of the Lighting Node PRO.
3. Connect the 9-pin end of the cable into an available internal 2.0 header on your motherboard.
4. Connect the individually addressable RGB LED strip into a 3-pin header labeled "LED". Use the extension cable if installing in a large case.
5. Optional: If you have an HD RGB LED hub (sold separately), plug the HD RGB LED cable into an available LED header on your motherboard to connect it.
6. Mount the magnetic RGB strips on the desired location inside your case. Alternatively, peel the adhesive tape on the back of the RGB strips to adhere them to your case.
Note: Avoid mounting the strips on components that are sensitive to magnets.
7. Connect the SATA power connector from your system power supply to the Lighting Node PRO.
8. Mount the Lighting Node PRO inside your case using the included double-sided tape.
9. Download the latest Corsair Link software from www.corsair.com/downloads for the full Corsair Link experience.
Please refer to the Corsair CL-9011109-WW Lighting Node PRO User Manual for more detailed instructions and illustrations.
Add New Comment