User Manual Q&AAnswer
Dec 16, 2024 - 10:59 AM
Adjusting the chain tension on the Honoson 745453 Mini Cordless Electric Chainsaw is a simple process. Here are the step-by-step instructions:
1. Ensure the chainsaw is turned off and the battery is removed for safety.
2. Locate the chain tensioning xxxx or xxxx on the side of the chainsaw's guide bar.
3. Loosen the chain tensioning xxxx or xxxx by turning it counterclockwise. This will release the tension on the chain.
4. Use your hand or a tool (if necessary) to lift the guide bar slightly and adjust the tension of the chain.
5. The chain should be snug against the guide bar, but still able to move freely. Avoid over-tightening the chain as it can cause damage to the chainsaw.
6. Once the desired tension is achieved, tighten the chain tensioning xxxx or xxxx by turning it clockwise. Make sure it is securely tightened.
7. Check the chain tension by pulling the chain away from the guide bar. It should have a slight amount of resistance.
8. Reinstall the battery and ensure it is properly connected before using the chainsaw.
Please refer to the user manual provided with your Honoson 745453 Mini Cordless Electric Chainsaw for specific instructions and illustrations on adjusting the chain tension.
Add New Comment