User Manual Q&AAnswer
Dec 16, 2024 - 10:57 AM
Adjusting the chain tension on the O-CONN OCMC6IN1 Handheld Portable Electric Chain Saw is a straightforward process. Here's how you can do it:
1. Ensure the saw is turned off and the battery is removed for safety.
2. Locate the chain tensioning xxxx , which is usually located on the side of the saw near the bar.
3. Use the included screwdriver or an appropriate tool to turn the chain tensioning xxxx clockwise to tighten the chain or counterclockwise to loosen it.
4. Check the chain tension by pulling up on the chain from the bottom of the bar. The chain should have a slight tension and should not sag or hang loose.
5. Once the desired tension is achieved, tighten the chain tensioning xxxx securely.
6. Reinstall the battery and ensure it is properly inserted before using the saw.
It's important to note that the chain tension should be checked regularly and adjusted as needed to maintain optimal cutting performance and safety. Refer to the user manual for specific instructions and illustrations on adjusting the chain tension for your O-CONN OCMC6IN1 Handheld Portable Electric Chain Saw.
Add New Comment