How do I install the eufy T8201 Video Doorbell 2K Wired? (eufy T8201 Video Doorbell 2K Wired User Guide)

Answer

manuals.plus

Dec 16, 2024 - 02:28 AM

To install the eufy T8201 Video Doorbell 2K Wired, follow these steps:

1. Install the EufySecurity App on your phone from the App Store or Google Play.
2. Register and log in to the app.
3. Scan the QR code found on the back of the documentation folder or on the back of the video doorbell.
4. Ring the existing doorbell to ensure it's working and locate the existing chimes in your house.
5. Shut off the doorbell power supply or the main power supply in your house.
6. Find the doorbell chime in your house, remove the cover, and locate the xxxx terminals with TRANS and FRONT markings.
7. Use the provided jumper to connect the FRONT and TRANS terminals to bypass the chime on the circuit.
8. Remove the existing doorbell button at the front door and carefully pull out the two wires.
9. Determine the mounting position of the doorbell and use the provided xxxx Hole Positioning-Card to mark the position for drilling holes if needed.
10. Use the anchors provided for materials like stucco, brick, or concrete. If mounting on a wooden wall or board, screws can be used directly.
11. Lead the two doorbell wires through the central square hole on the mounting bracket and fasten the bracket to the wall or door frame.
12. Connect the wires to the terminals at the back of the doorbell and tighten the screws.
13. Remove the films on the thermal conductive pads on the mounting bracket.
14. Hook the doorbell on top of the mounting bracket and snap the bottom to the bracket.
15. Switch on the doorbell or master circuit breaker.
16. Wait for the doorbell ring to flash yellow and follow the on-screen instructions in the EufySecurity App to connect the video doorbell to your home Wi-Fi.
17. Install the doorbell power connector to the doorbell chime and pair it to your video doorbell using the app.
18. You can adjust the volume and ringtone of the electronic chime using the buttons on its side.

Please note that if you are not comfortable handling electricity wiring, it is recommended to consult a qualified electrician for assistance.