User Manual Q&AAnswer
Dec 16, 2024 - 02:19 AM
To pair the receivers with the transmitter, please follow these steps:
1. Make sure the batteries are installed in both the transmitter and receivers. The transmitter requires AAA 1.5V batteries (not included), while the receivers come with CR2032 batteries already installed.
2. Press and hold the button on the transmitter for a few seconds until the LED light starts flashing.
3. Press the corresponding button on one of the receivers within 10 seconds of pressing the transmitter button. The receiver will emit a beep sound and the LED light will flash, indicating that it has been successfully paired with the transmitter.
4. Repeat step 3 for each receiver you want to pair with the transmitter. You can pair up to six receivers in total.
5. Once all the receivers are paired, you can attach them to your desired items using the key rings or adhesive stickers provided.
6. To locate a misplaced item, simply press the button on the transmitter that corresponds to the receiver attached to that item. The receiver will emit a loud beep sound and the LED light will flash, helping you locate the item.
Note: For specific instructions or troubleshooting, please refer to the user manual provided with the product.
Add New Comment