User Manual Q&AAnswer
Dec 16, 2024 - 01:58 AM
To assemble the Lasko T48310 Oscillating Tower Fan, follow these steps:
1. Lay the fan down with the front grill and control panel facing up.
2. Interlock the bosses on Support Base A into the boss holes on Support Base B to assemble the support base halves.
3. Secure two #8 X 3/8" screws into the two outer holes in the bottom of the base.
4. Thread the power supply cord through the large hole in the center of the support base assembly.
5. Align the support base assembly with the motor base, ensuring that the cord channel on the bottom of the support base assembly is towards the back of the fan.
6. Attach the support base assembly to the motor base using 1/2" long M5 screws. Make sure to align the key on the support base assembly with the locating notch on the motor base.
7. Gently pull any excess slack off the power supply cord and place it in the wire locating trough.
For visual reference, please refer to Figure 1, Figure 2, and Figure 3 in the user manual.
If you encounter any difficulties during the assembly process, please refer to the user manual or contact Lasko customer service for further assistance.
Add New Comment