User Manual Q&AAnswer
Dec 16, 2024 - 01:40 AM
To program the GE 34927 Universal Remote for your TV, you can follow the Direct Code Entry method outlined in the instruction manual. Here are the step-by-step instructions:
1. Locate the Code List included with your remote. Find the section for TVs and locate the brand of your TV. Circle all the remote codes listed for your TV brand.
2. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
3. Press and release the TV button on the remote. The red light will blink once and remain on.
4. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List. The red light will turn off after entering the fourth digit.
5. Point the remote at your TV and test the buttons on the remote to see if the TV responds as expected. If the buttons do not operate the TV, repeat steps 2-4 using the next code you circled for your TV brand.
6. Repeat steps 2-5 for each TV brand code you circled until you find a code that works for your TV.
Note: If you do not find a remote code that works for your TV or there are no codes listed for your TV brand, you can try the Auto Code Search method outlined in the manual.
Remember to refer to the instruction manual for any additional details or troubleshooting tips.
Add New Comment