User Manual Q&AAnswer
Dec 16, 2024 - 12:49 AM
To program the JFA K1200 Long Distance Remote Control to work with your existing devices, follow the steps below:
1. Enter Learn Mode:
- Press the "A" key on the transmitter unit. The LED action on the receiver unit will stay constantly on.
2. Record the Functions:
- Press the key on the K1200 control that you want to record. The LED action on the receiver unit will start flashing.
- Point the original control of your TV or audio system towards the IR code entry on the receiver unit.
- Press the corresponding key on the original control until the LED action on the receiver unit flashes quickly and then stays constantly on.
- Repeat this process for other keys you want to program.
3. Exit Learn Mode:
- After finishing the programming process, press the "A" key on the receiver unit or wait for 10 seconds to exit the Learn Mode.
By following these steps, you should be able to program the JFA K1200 Long Distance Remote Control to work with your TV and audio system. For more detailed instructions and information, please refer to the instruction manual provided with the product.
Add New Comment