Answer
Dec 16, 2024 - 12:37 AM
To pair the receiver with the transmitter, please follow these steps:
1. Make sure the Bluetooth function of your mobile phone is turned off.
2. Power on the transmitter by pressing the power button.
3. Press and hold the PAIR button on the transmitter until the red and blue LED lights start alternating.
4. Power on the receiver by pressing the power button.
5. Press and hold the MIC/CH (Bluetooth function) button on the receiver until the red and blue LED lights start alternating.
6. After a few seconds, the transmitter's light will turn solid blue, and the receiver's light will blink slowly. This indicates that the pairing is completed.
7. If you want to pair the receiver with a mobile phone, switch off the transmitter and follow the same steps as above, but only pair the receiver with the mobile phone.
8. If you want to pair the receiver with both the transmitter and a mobile phone, first pair the receiver with the mobile phone as described in step 7, and then pair the receiver with the transmitter as described in steps 2-6.
Note: If the transmitter, receiver, and mobile phone are not connected successfully, you may need to repeat the pairing process.
Add New Comment