User Manual Q&AAnswer
Dec 15, 2024 - 11:57 PM
To connect the PYLE PRJS66B Ceiling Hanging Pendant Speaker to an audio amplifier or receiver, please follow these steps:
1. Prepare the speaker wire: Strip the ends of the speaker wire to expose the bare wire.
2. Connect the speaker wire to the speaker: Insert one end of the speaker wire into the connector on the PYLE PRJS66B that corresponds to the speaker.
3. Connect the other end of the speaker wire to the amplifier or receiver: Find the appropriate output terminals on your audio amplifier or receiver. These terminals are usually labeled as "Speaker Out" or "Amplifier Out." Connect the other end of the speaker wire to these terminals.
4. Mount the speaker: Use the provided mounting bracket or eye bolt to securely attach the PYLE PRJS66B to the ceiling in your desired location.
5. Connect the audio source: If you are using an external audio source, such as a music player or TV, connect it to the audio amplifier or receiver using the appropriate input connection (e.g., RCA, 3.5mm AUX, Bluetooth).
6. Power on the audio amplifier or receiver: Make sure your audio amplifier or receiver is connected to a power source and turn it on.
7. Adjust settings: Adjust the volume and other settings on your audio amplifier or receiver as needed.
Once these steps are completed, the PYLE PRJS66B Ceiling Hanging Pendant Speaker should be connected to your audio amplifier or receiver and ready to deliver audio from the connected source.
Add New Comment