How do I install the KOHLER K-99696-NA DTV Plus Amplifier Module? (kohler K-99696-NA DTV Plus Amplifier Module Installation Guide)

Answer

manuals.plus

Dec 15, 2024 - 11:52 PM

To install the KOHLER K-99696-NA DTV Plus Amplifier Module, please follow these steps:

1. Before beginning the installation, make sure to read and understand all the important instructions and warnings provided in the installation guide.

2. Determine the location where you want to install the amplifier module. Ensure that it is away from heat sources and in a dry location with proper airflow.

3. Decide on the mounting option that suits your installation needs. The amplifier module can be surface-mounted, cabinet-mounted, under-mounted, or wall-mounted. Refer to the installation guide for specific instructions for each mounting option.

4. If you choose a surface-mount or under-mount installation, attach the provided rubber feet to the underside of the amplifier module to protect the surface it will be placed on.

5. If you choose a cabinet-mount or wall-mount installation, use the supplied mounting brackets and screws to secure the amplifier module in place. Make sure to mark the hole locations, drill pilot holes if necessary, and secure the brackets using the provided screws.

6. Plan the location of the amplifier module to allow easy access to the front and back ports.

7. If you are using the amplifier module with the DTV+ showering system, you will need to connect it to the K-99695 system controller. Use the provided data cable to connect the amplifier module to the system controller. Refer to the "DTV+ System Layout" section in the installation guide for more details.

8. Before operating the system for the first time, download and install the latest software for connected components. This may take some time depending on your system configuration and internet connection speed. Do not disconnect the power from any components during the software download and installation process.

9. Once the installation is complete, you can operate the amplifier module using the DTV+ system controller or through wireless Bluetooth connection with compatible devices. Refer to the operation section in the installation guide for more information on using the amplifier module.

Please note that these are general installation instructions, and it is recommended to refer to the specific instructions provided in the KOHLER K-99696-NA DTV Plus Amplifier Module Installation Guide for your model.