How do I install the Earthquake Sound IMAGE-83X In-Wall Speaker? (Earthquake Sound IMAGE-83X In-Wall Speaker User Manual)

Answer

manuals.plus

Dec 15, 2024 - 11:33 PM

Installing the Earthquake Sound IMAGE-83X In-Wall Speaker is a straightforward process. Here are the step-by-step instructions:

1. Determine the ideal location: Choose the location on the wall where you want to install the speaker. Ensure that there are no obstructions or electrical wiring behind the chosen spot.

2. Cut the speaker hole: Use a stud finder to locate any studs in the wall. Mark the desired speaker hole dimensions on the wall, making sure to avoid any studs. Use a drywall saw or a keyhole saw to carefully cut out the hole.

3. Run speaker wires: Run speaker wires from your audio source or amplifier to the location of the speaker hole. Ensure that the wires are properly concealed within the wall or routed through a conduit for a clean installation.

4. Connect the wires: Strip the ends of the speaker wires and connect them to the corresponding terminals on the back of the IMAGE-83X speaker. Ensure a secure connection by tightening the terminal screws.

5. Mount the speaker: Insert the IMAGE-83X speaker into the wall hole, making sure it fits snugly. Use the provided mounting brackets to secure the speaker in place. Follow the instructions in the user manual for specific mounting instructions.

6. Adjust tweeter and woofer levels: The IMAGE-83X speaker features adjustable tweeter and woofer levels. Use the included tweeter and woofer volume controls to fine-tune the sound according to your preferences. Start with the levels set to the default position and make adjustments as needed.

7. Test the speaker: Once the installation is complete, connect your audio source or amplifier to the speaker and test the sound output. Adjust the volume and settings on your audio source to ensure optimal sound quality.

Please refer to the user manual provided with the Earthquake Sound IMAGE-83X In-Wall Speaker for detailed installation instructions and any additional information specific to your model.