User Manual Q&AAnswer
Dec 15, 2024 - 11:26 PM
To connect the Acoustic Audio PSC-32 Center Channel Speaker to your home theater system, follow these steps:
1. Identify the center channel speaker output on your home theater receiver or amplifier. It is usually labeled as "Center" or "C."
2. Use speaker wire to connect the positive (+) terminal on the back of the PSC-32 speaker to the positive (+) terminal on the center channel output of your receiver or amplifier. Make sure to match the colors of the wires (usually red and black) for correct polarity.
3. Connect the negative (-) terminal on the back of the PSC-32 speaker to the negative (-) terminal on the center channel output of your receiver or amplifier using speaker wire.
4. Repeat the above steps for any other speakers in your home theater system, ensuring that each speaker is connected to the correct output on your receiver or amplifier.
5. Once all the connections are made, double-check that the wires are securely connected and there are no loose connections.
6. Power on your home theater system and test the sound output. Adjust the volume and settings on your receiver or amplifier to achieve the desired sound level and balance.
Refer to the user manual provided with the Acoustic Audio PSC-32 Center Channel Speaker for any additional information or troubleshooting tips specific to your setup.
Add New Comment