User Manual Q&AAnswer
Dec 15, 2024 - 11:18 PM
Connecting the MiniMe P10V2 subwoofer to your audio system is relatively straightforward. Here are the steps to follow:
1. Determine the type of output your receiver has: Check if your receiver has RCA (line-level) outputs or speaker level outputs. This will determine the type of connection you will use.
2. RCA Connection: If your receiver has RCA outputs, you can use an RCA cable to connect the subwoofer. Here's how:
a. Locate the RCA input on the back of the subwoofer. It is usually labeled as "Low-Level Input" or "Subwoofer Input."
b. Connect one end of the RCA cable to the RCA output on your receiver.
c. Connect the other end of the RCA cable to the RCA input on the subwoofer.
d. Make sure the connections are secure.
3. Speaker Level Connection: If your receiver only has speaker level outputs, you can use speaker wire to connect the subwoofer. Here's how:
a. Locate the speaker level input on the back of the subwoofer. It is usually labeled as "High-Level Input" or "Speaker Input."
b. Connect the positive (+) speaker wire from the receiver's speaker output to the positive (+) speaker input on the subwoofer.
c. Connect the negative (-) speaker wire from the receiver's speaker output to the negative (-) speaker input on the subwoofer.
d. Make sure the connections are secure.
4. Adjust the settings: Once the subwoofer is connected, you may need to adjust the settings on your receiver to ensure proper integration with your audio system. This includes adjusting the crossover frequency, volume level, and phase settings. Refer to your receiver's manual for instructions on how to access and adjust these settings.
5. Test the subwoofer: Play some audio through your audio system and check if the subwoofer is producing sound. If not, double-check the connections and settings.
Note: It is important to read the user manual of the MiniMe P10V2 subwoofer for specific instructions and recommendations regarding the connection and setup process.
Add New Comment