User Manual Q&AAnswer
Dec 15, 2024 - 11:06 PM
To adjust the image size and focus on the Sanyo PLC-XU56 projector, follow these steps:
1. Image Size Adjustment:
- Position the projector at the desired distance from the screen.
- Use the zoom ring on the lens to adjust the image size. Rotate it clockwise to increase the size and counterclockwise to decrease it.
- Alternatively, you can move the projector closer or farther from the screen to achieve the desired image size.
2. Focus Adjustment:
- Turn on the projector and display an image.
- Locate the focus ring on the lens. It is usually a separate ring near the zoom ring.
- Rotate the focus ring clockwise or counterclockwise until the image appears sharp and clear.
For more detailed instructions and illustrations, please refer to the "Adjusting the Image Size and Focus" section in the owner's manual of the Sanyo PLC-XU56 projector (page 26).
Note: It is important to ensure that the projector is placed on a stable surface and that the screen or projection surface is flat and perpendicular to the projector for optimal image quality.
Add New Comment