User Manual Q&AAnswer
Dec 15, 2024 - 10:49 PM
To adjust the focus on the NEC NP60 projector, follow these steps:
1. Turn on the projector and wait for it to warm up.
2. Use the remote control or the buttons on the projector to access the menu.
3. Navigate to the "Image" or "Picture" menu using the arrow keys.
4. Look for the "Focus" or "Sharpness" option in the menu.
5. Use the arrow keys to select the "Focus" or "Sharpness" option and press the Enter or OK button.
6. Adjust the focus by using the arrow keys or the focus ring on the projector lens. Turn the focus ring clockwise or counterclockwise until the image appears clear and sharp.
7. Press the Enter or OK button to save the changes and exit the menu.
If the image still appears blurry or out of focus after adjusting the focus, make sure that the projector is positioned at the correct distance from the screen. Refer to the projector's user manual for the recommended projection distance for your desired screen size.
If you are still experiencing issues with the focus, it is recommended to consult the user manual or contact NEC customer support for further assistance.
Add New Comment