User Manual Q&AAnswer
Dec 15, 2024 - 10:43 PM
Installing the Pyle PLMPA35 Dual Channel Mini Portable Stereo Receiver in your car is a relatively straightforward process. Here are the step-by-step instructions:
1. Gather the necessary tools: Before you begin the installation, make sure you have the following tools handy: wire cutters/strippers, electrical tape, crimp connectors, a screwdriver, and any additional mounting hardware that may be required.
2. Disconnect the car's battery: To ensure safety during the installation process, disconnect the negative terminal of your car's battery. This will prevent any electrical mishaps while working with the receiver.
3. Locate a suitable mounting location: Choose a suitable location in your car to mount the receiver. It should be easily accessible and secure. Common mounting locations include under the dashboard, in the glove compartment, or in the trunk.
4. Connect the power wires: Connect the power wires of the receiver to the car's power supply. The receiver typically requires a 12V power source. Connect the red wire to the positive terminal of the car's battery and the black wire to the negative terminal or a suitable ground point in the car's chassis.
5. Connect the audio input wires: Identify the audio source you want to connect to the receiver. The PLMPA35 usually accepts RCA audio inputs. Connect the audio source's RCA cables to the corresponding RCA input jacks on the receiver.
6. Connect the speakers: Determine the speakers you want to connect to the receiver. The PLMPA35 is a dual-channel receiver, so you can connect two speakers or a pair of speakers and a subwoofer. Connect the speaker wires to the corresponding speaker output terminals on the receiver. Ensure that the positive (+) and negative (-) terminals are correctly matched.
7. Secure the receiver: Once all the connections are made, secure the receiver in the chosen mounting location using the provided mounting hardware or other suitable methods. Make sure it is firmly fixed to prevent any movement or vibrations.
8. Reconnect the car's battery: After the receiver is securely installed, reconnect the negative terminal of your car's battery.
9. Test the system: Turn on your car's audio system and test the receiver to ensure it is functioning correctly. Adjust the volume and other settings as desired.
Please note that these instructions are general guidelines, and it is always recommended to consult the user manual provided with the product for specific instructions and any additional information or precautions.
Add New Comment