User Manual Q&AAnswer
Dec 15, 2024 - 10:41 PM
The installation process for the Pyle PWRC52 Ceiling Wall Mount Speakers is relatively straightforward. Here are the general steps:
1. Determine the desired placement of the speakers. The manual provides recommendations for optimal speaker placement.
2. If you are unsure about your ability to install the speakers, it is recommended to contact a qualified installer or your dealer for assistance.
3. For in-wall speakers:
a. Cut the drywall, ensuring there is at least half an inch of space between a wall stud and the speaker cutout.
b. Separate the frame by unscrewing the two screws.
c. Place the frame assembly on the wall and secure it with six Phillips head screws.
d. Connect the speaker wires to the speaker and secure them with six Phillips head screws.
e. Use adhesive strips to secure the grille.
f. Adjust the tweeter position if necessary before replacing the metal grille.
4. For in-ceiling speakers:
a. Cut the drywall, ensuring there is at least half an inch of space between a wall stud and the speaker cutout.
b. Connect the speaker wires to the speaker.
c. Place the frame assembly on the wall and secure it with four Phillips head screws.
d. Use adhesive strips to secure the grille.
e. Adjust the tweeter position if necessary before replacing the metal grille.
Please refer to the complete user manual for detailed instructions, including wiring diagrams and troubleshooting tips.
Add New Comment