User Manual Q&AAnswer
Dec 15, 2024 - 10:34 PM
To connect your smartphone to the Rockville BLUAMP 21 via Bluetooth, follow these steps:
1. Turn on the BLUAMP 21 amplifier and ensure that the Bluetooth function is enabled. You may need to refer to the user manual for specific instructions on how to enable Bluetooth.
2. On your smartphone, go to the Settings menu and navigate to the Bluetooth settings.
3. Make sure that Bluetooth is turned on and your smartphone is discoverable.
4. On the BLUAMP 21 amplifier, press the Bluetooth pairing button or navigate to the Bluetooth pairing option in the settings menu.
5. The amplifier will start searching for nearby Bluetooth devices. On your smartphone, you should see the BLUAMP 21 listed as an available device.
6. Select the BLUAMP 21 from the list of available devices on your smartphone.
7. If prompted, enter a passcode or PIN to pair your smartphone with the amplifier. Refer to the user manual for the default passcode or instructions on how to set a custom passcode.
8. Once the pairing is successful, your smartphone should be connected to the BLUAMP 21 via Bluetooth. You can now stream audio from your smartphone to the amplifier.
Note: The specific steps may vary slightly depending on your smartphone's operating system and the version of the BLUAMP 21 amplifier. Refer to the user manual for detailed instructions specific to your device.
Add New Comment