User Manual Q&AAnswer
Dec 15, 2024 - 10:25 PM
Programming the AnyCommand ACR-20 Air Conditioner Remote Control for your specific air conditioner model can be done using the instructions provided in the user manual. Here is a step-by-step guide:
1. Start by turning on your air conditioner manually so that it can be controlled.
2. Press and hold the SETUP button on the remote control until the RED indicator light stays illuminated.
3. Release the SETUP button.
4. Enter a 4-digit code from the library code table provided in the user manual. If you don't have the code table, you can try searching for the code using the model number of your air conditioner unit.
5. After entering the last digit of the code, the RED indicator light will turn on if the code is valid.
6. Test the remote control by pressing the POWER button to turn the air conditioner on and off. If it works, the programming is successful. If not, repeat the steps with a different code from the library or try the auto-search process.
If you are still having trouble programming the remote control, refer to the user manual for additional troubleshooting steps or contact the manufacturer's customer support for further assistance.
Add New Comment