Answer

Dec 15, 2024 - 10:07 PM
Installing the CHHLIUT 8541716927 Hidden Windshield Car Radio Antenna is a simple process. Here are the steps to install it:
1. Clean the windshield: Before installation, make sure the inside of the windshield is clean and free from any dirt or debris. Use a glass cleaner and a microfiber cloth to wipe the area where you plan to install the antenna.
2. Find the optimal location: Choose a spot on the windshield where the antenna will have the best reception. It is recommended to place it near the top center of the windshield for optimal performance.
3. Peel off the adhesive backing: The antenna comes with an adhesive backing. Peel off the protective film to expose the adhesive side.
4. Attach the antenna: Carefully place the adhesive side of the antenna onto the chosen location on the windshield. Press firmly to ensure a secure attachment.
5. Route the cable: The antenna has a cable that needs to be connected to the car's radio system. Route the cable along the edge of the windshield and down to the radio unit. Make sure to keep the cable hidden and secure it in place using cable clips if necessary.
6. Connect the cable: Once the cable reaches the radio unit, locate the antenna input port. It is usually labeled as "ANT" or "AM/FM." Connect the cable to this port securely.
7. Test the reception: Turn on the car's radio and tune in to your favorite AM or FM station. Check the reception quality and adjust the antenna's position if needed for better signal strength.
Please refer to the user manual provided with the CHHLIUT 8541716927 Hidden Windshield Car Radio Antenna for any specific instructions or troubleshooting tips.
Add New Comment